There are 4 anchor points for the second row seat in the 2007 Santa Fe. The 2 in front are covered by square plastic caps that snap off. The ones behind the seat are visible when looking down at the base of the seat from the cargo compt. You will need a 9/16 socket with a long handle, as these bolts are tight. For the rear 2, you will need a socket extension of at least12 inches to reach down between the cargo floor and the back of the seats. When all 4 bolts are removed, you can tilt the seat back and remove the anchor bolt for the right side seat belt. Then, fold the back forward and remove the smaller, right side seat. Finally, fold the back forward and remove the larger, left side seat.
The 2007 Hyundai Santa-FE has 34.2 cu.ft. of cargo capacity with all of its seats in place.
The 2007 Hyundai Santa-FE has a V6 engine.
The 2007 Hyundai Santa-FE has 24 valves.
The 2007 Hyundai Santa-FE has a 5-speed manual.
The 2007 Hyundai Santa-FE is a gas-powered vehicle.
The 2007 Hyundai Santa-FE has a drag coefficient of .38 Cd.
The 2007 Hyundai Santa-FE's turning circle is 35.8 ft..
The 2007 Hyundai Santa-FE is 15 ft. 4.1 in. (184.1 in.) long.
The 2007 Hyundai Santa-FE runs on regular unleaded.
The height of the 2007 Hyundai Santa-FE is 5 ft. 7.9 in. (67.9 in.).
The 2007 Hyundai Santa-FE has double overhead cam (DOHC).
The curb weight of the 2007 Hyundai Santa-FE is 3727 lbs..