To remove the slide from an Iver Johnson TM22PB Trailside:
(1) pull the slide back
(2) push down on the take down button (top of the slide in front of the rear sights)
(3) push the slide forward (if you did this correctly the recoil spring is pinned and the slide will not be forced closed).
(4) take the side grips off
(5) drift the mainspring housing pin out
(6) remove the mainspring housing (the spring is pinned so there's no worry of anything launching).
(7) take the slide off
Cheers
To remove the slide from an Iver Johnson TM22PB Trailside: (1) pull the slide back (2) push down on the take down button (top of the slide in front of the rear sights) (3) push the slide forward (if you did this correctly the recoil spring is pinned and the slide will not be forced closed). (4) take the side grips off (5) drift the mainspring housing pin out (6) remove the mainspring housing (the spring is pinned so there's no worry of anything launching). (7) take the slide off Cheers
lift the top latch and remove cyl.
Iver Johnson was created in 1871.
Iver Johnson ended in 1993.
Remove the screw, tap lightly
Iver Johnson Champion$200.
need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer
My iver johnson has the serial # on the trigger guard
Ensure the gun is unloaded. Remove the magazine. Pull back the operating slide and visually inspect the barrel to make sure there is not a round chambered. Loosen the screw on the band on the forward end of the stock and slide the band forward. Remove the hand guard. Remove the screw just behind the trigger guard. Remove the stock. Pull back on the operating slide spring and hold it while pulling the operating slide spring guide out of trigger housing. Carefully relieve the tension on the spring, then slide the spring guide out. Remove the trigger housing retaining screw and the two trigger housing retaining pins. Lift the receiver away from the trigger housing. Remove the operating slide by sliding it forward. Lift out the recoil plate. (Careful – it is under tension from the firing pin spring). Remove the bolt and firing pin piece and slide them apart. You have now field stripped your Iver Johnson .22 cal. carbine.
go to: http://www.iverjohnsonarms.com
The first iver Johnson firearms with this name appeared in 1883.
The Targetmaster Slide Action, made by Erma in 1985, books at $175 in 100% condition.