0
You just have to grab with a pliers and pull it out. You will have to twist and wiggle to break the rust though.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Will it burn the wires if you remove the spark plug heat shield?
The factory puts the shield there for a reason.
How do you change spark plugs in a 2004 dodge neon?
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
How can you tell if a spark plugs are fouled out on a dodge 1500 5.9?
You have to remove them and inspect.You have to remove them and inspect.
How do you change the spark plugs on a 1994 dodge caravan?
Disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the spark plug cables and covers, and connect the car battery.
Tools needed to remove spark plug wires from 2004 dodge neon?
use your hands.
How do you remove a stripped spark pluge from a 1997 dodge Dakota sport?
Turn it counter-clockwise
How do you change the spark plugs on 2001 3.7L V6 1500 dodge ram truck?
They are under the 6 ignition coils. There is a coil for each spark plug. You have to remove the coils, and then remove the plugs.
How do you replace spark plugs on a 2006 dodge charger 3.5?
You have to remove the intake plenum. It just unbolts.
How do you Change spark plugs on a 5.9 2002 dodge ram 1500?
To change spark plugs on a 5.9 2002 Dodge Ram 1500, locate the old spark plugs. These are located at the end of the 8 wires inside the vehicle's bonnet. Remove the old spark plugs and replace with new.
Where are the spark plug located on 2002 4.7 liter dodge Dakota?
They are under the coils. You have to remove the coils to access.
How do you replace the spark plugs on 1998 Dodge Intrepid 3.2 liter?
Disconnect the battery, remove the cables and boot covers, and remove the old spark plugs. Next, properly dispose of the spark plug, put in the new spark plug, attach the boot cover and wires, and connect the battery.
How do you change spark plug's and wires on a 3.5 Dodge Intrepid?
there are no wires. each spark plug has it's own "coil on top" remove the coil by pulling straight up . then remove and replace the spark plug. That wrong ther are wires on the 3.5 and it,s not easy you need to remove the intake manafold to remove & run new wires
