You have to take off the door panel by unpopping it and then the speakers are revealed. All you have to do is unscrew them, unplug the cables and replace with new ones. Screw them back in and pop the door panel back on. Simple!
Hope this helps :)
13cm
You will need to remove the front speaker covers. The speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new speakers.
"I think the front speakers are 5"X 7"
Remove the mesh grille from the speakers, they just pop out. The screws holding the speakers in will then be exposed. Remove these screws and take speakers out.
If your talking about the door speakers then you will have to remove the door panels to get to the speakers.
how do you remove the drum the wheels are off
==headline==
what needs to be remove before you change
In order to remove the screws that secure the rear speakers, you need a 7/32" socket and socket wrench. The wiring harness I have yet to figure out how to remove from the backs of the speakers lol.
there are instructions with pictures on the crutchfield website.
Not sure how your speakers are installed, but Haynes Manual says: Remove speaker screws; pull out speaker; remove speaker wires; installation is reverse.
Ford Ka was created in 1996.