There are two bolts in front of the bottom part of the seat you have to remove.Once you remove the bolts the bottom should come right out.For the back of the seat there are also two bolts you have to remove.They hold in the back of the seat and the rear seat belts.Remove those and lift up on the back cushion and that should come right out.
No, the tank has to be removed.
replace the seat belt
well the first thing is to remove the lower seat. It has two clips near the front of it . Remove the lower seat now. Next remove the side panel right above the back seat. Now you have to remove the bolts for the seat belts, it holds the back part of the seat in. move the back part of the seat up towards the back window. You should hear the seat come loose. Now when you put the seat back in don't forget to pull the seat belts back though.
You need to remove the rear seat cushion and seat back, then remove the two side panels on either side of the rear deck, then lift up the rear deck to gain access to the two 6x9's.
Remove the bolts.
Fold down, or remove rear seat back and climb in to open from inside.
To remove the bottom part of the rear seat, lift up on the front of the seat and it will pop out of the latches. To remove the upper part of the back seat you have to remove the 15mm bolts and nuts securing the bottom brackets of the seat. There are two bolts, one on each side of the back bottom. and two nuts securing the seat belts and brackets holding the seat back. The next part is how I found it to be the easiest to get the top loose. lay down in the trunk on your back, grab the bottom of the seat back and while lifting use your elbows to push the top of the seat into the passenger compartment slightly. The top hooks will release and the seat will fall into the passenger compartment. An assistant really helps at this point.
NO, it doesn't fold down. You can pop out the bottom bench and unscrew the seat belt bolts and you should be able to take the seat off.
Lift up on the seat cushions to release and remove them, then fold the back seats down and unscrew the assembly from their mounts and remove.
You have to remove the back seat.Remove lower seat coushin. it pulls up then outRemove back part of the coushin 2 bolts in each lower cornerremove retaining clips the hold package tray in place and remove package trayremove the speakersEasy as that :)
Remove the back seat with a number 55T torque screw socket and then you can slide out the back panel to get to the speakers.
no. check fuses and relays.