lift bolt handle reteive bolt but just before you get bolt all the way back pull trigger and the bolt will slip free of the action.
Addition:
The Model 1920 has two mechanisms that the bolt must pass to allow bolt removal. The sear (attached to the trigger) releases the striker, and is also the primary bolt stop.
The second bolt stop is a detent ball and spring positioned in the left side receiver bolt rail. Some users would/will carry the rifle slung over their shoulder, with bolt open. The trigger does not need much pressure to release the bolt. The detent is an added feature to prevent bolt loss in the field. The bolt engages the detent after it clears the sear during removal. In normal operation, the detent is properly lubricated, and a light tug will cause the left bolt lug to force the ball down and allow the bolt to come free of the rifle. Many users do not even notice the added pressure of the detent ball bolt stop during bolt removal.
Given an 85+ year old rifle, sometimes the detent ball will rust, stick to the receiver, or otherwise not retract into its recess. After you lift the handle, retract the bolt, and pull the trigger to release (sear clears bolt), if the bolt does not slide free of the receiver with a moderate tug to pass over the detent, then the detent may be frozen. If you can not get the bolt to clear the detent with reasonable backward pressure on the bolt handle, to prevent damage, recommended that you take rifle to a competant gunsmith for cleaning or repair of bolt stop (detent ball, spring and detent recess).
Your rifle was made by Savage for Western Auto. It is a Savage Model 46. You can contact Savage for an owners manual. It is a very basic bolt action. Remove the screw on the underside of the forearm to take action out of stock. Push the 2 pins out that hold the trigger group in place, and you can remove the bolt. gunpartscorp was a schematic at their website, under savage 46.
If we are talking about a savage model 99 lever action rifle? then it was made by savage in 1939.
savage model 25 pump action 22 long rifle
The Savage model 110 is a repeating bolt-action rifle. The Savage model 110E is the same as the Savage model 110.
If we are talking about a savage model 99 lever action rifle?Then your rifle was made by savage in 1946.
Your savage model 99 lever action rifle was made by savage arms in 1923.
The savage model 29 slide action .22cal rifle was made from 1929-1967.
If we are talking about a lever action single shot ,22cal rifle,with a 18in barrel,and Martini style action?These savage/stevens model 89 rifles were made in 1976.
What is a 75th anniversary model 1895 lever action savage arms worth
A rifle made by Savage Arms that first utilized a rotating clip inside the action.
Assuming that you have a Savage model 1899 lever action rifle chambered in 30-30 Win.caliber,then your Savage model 1899 rifle was made in the year 1932 with the serial number that you have supplied.
With the serial number that you have provided,your Savage model 99 lever action rifle was made in the year 1910.