0
Quite simple. You can do it with the barrel fixed to the stock, or removed. If you have a scope mounted, it may get in the way. The trigger assembly also acts as the method of holding the bolt in. Open your bolt with the trigger depressed a bit further than you would to fire a round. With a little love and some slight wiggles, the bolt should slide out no problem.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Where do you get a bolt for a 22 caliber rifle JC Higgins model 103228?
Try e-gunparts.comm, gun shops, gun shows, want ads, internet searches.
How do you remove the bolt from a jc Higgins model 101.25 410 bolt action shotgun?
First remove the screw opposite the bolt. Operate the bolt as if you were cocking the gun, pull the trigger and it will slide out.
Where can you get a bolt for model 103228 22 cal?
Try gun shops, gun shows, want ads, for sale ads, garage sales, estate sales, egunparts
How do you get the bolt out of a jc higgins 16 gauge model 583.18?
Check that gun is unloaded. Remove screw on the LEFT side of action near the bolt. Open bolt, release safety, press and hold trigger, slide bolt out.
Why was the JC Higgins bolt action shotgun model 583.2 recalled?
NO
Where can I get a manual for a JC Higgins model 583-1101?
This is a model 11 bolt-action shotgun.
You need the bolt for a JCS Higgins 20 gauge model 583.15 Bolt action?
looking for parts
Who was the maker of JC Higgins model 101-16 22 cal semi automatic?
how do you break down a jc higgins 101.16 bolt and instructions for removing bolt from rifle
Where can you get parts for a JC Higgins 22 caliber bolt action rifle model number 103.228?
Numrich Gn Parts Crp. I believe it is a Marlin Model 81. I Have A JC Higgins Model #103.229 Bolt Action E Mail paventyj7257@sbcglobal.net
Where is the serial number on a model 583.9 JC Higgins 20 Ga bolt action shotgun?
what is a J C Higgins Model 583.9 20 gauge worth
How do you release the bolt to a j.c. Higgins 583.6?
Remove the screw that is above the bolt on the receiver. This screw holds the bolt into the receiver and once it is removed the bolt will slide out.
How do you disassemble JC Higgins 410 model 10125?
That shotgun was made for Sears by Savage/Stevens and is basically the Stevens 59A bolt-action. Remove the takedown screw from the bottom of the stock and separate the metal from the wood. Remove the bolt stop screw from the left side of the receiver and remove the bolt rearward. We do not recommend any further disassembly.
