Lift the car on a jack, remove the tire, remove the brake shoe/caliper and remove the brake pad. Put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car.
The brake fluid reservoir in your Ford Explorer is in the engine compartment , near the firewall . It is on the drivers side of the engine compartment .
On the drivers side of the firewall.
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
My 1995 Ford Explorer XLT has disk brakes front and rear , so it takes brake pads 1991 to 1994 Ford Explorers had drum brakes on the rear , so they took brake shoes
Yes , on the back wheels ( disc brakes on the front )
remove the brake caliper and the rotors come right off
The 1994 Ford Explorer rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off.
No steering power or brake power ford explorer 1999?
Where is brake light fuse for 2004 Ford Explorer located
The 1994 Ford Probe has a brake fluid reservoir that should be mounted on the drivers side firewall. Remove the cap on top to add fluid.
how do i change a fuel filter in a 1994 ford explorer
Remove the cover and look for damage.
Remove the rear tire and wheels. Remove the emergency brake shoe spring. The brake shoe will come off. Reverse the process to install the new brake shoe.
Remove wheelsDisconnect the emergency brake cablesDisconnect the brake linesRemove caliper mounting boltsSlide caliper off rotor
why don't you guys take it to a shop and get it fixed, that's why we are here.
you can't,your vehicle has the "P.A.P.S" system,you have to take it to the dealer,sorry.
pull really hard
how do you remove a fan blade from a 1998 ford explorer
how to open hood with a broken cable on a 1994 ford explorer
The switch isn't repairable and should be replaced if bad. It's located on the bar where the brake pedal is attached.
Is there a fuse I can remove for the ford explorer tire sensor
To put brake fluid in a 1997 Ford Explorer, you must locate the brake fluid reservoir. Once you locate it, unscrew the cap, and replenish the brake fluid.
What size is the steel brake line tubing on a 1994 Ford Ranger
On a 1994 Ford Explorer : The engine is fuel injected so there is no carburetor