Want this question answered?
1 Open the Volvo's passenger door and remove the triangular cover that hides the mounting nuts for the mirror. The cover is located inside the door where the mirror attaches to the outside. The cover press-fits into the door frame. Pull on it to remove it. 2 Hold the mirror in place and remove the three nuts located behind the cover with a long-well socket and ratchet. 3 Pull the mirror away from the door. The mirror has three threaded bolts inserted into the side that stick through the door. Be careful not to scratch the door with the bolts as you remove the mirror. 4 Mount the new mirror against the door while seating the bolts through the door into the inside. 5 Secure the mirror to the door with the three nuts, long-well socket and ratchet. 6 Press the cover back onto the Volvo's door frame.
to replace the right side door mirror on the 1992 Chrysler New Yorker, first remove the interior door panel. Then, remove the access cover at the base of the mirror inside the door. Then, remove the three bolts and the wiring that holds the mirror in place. You can then attach the wiring to the new mirror and housing, and then bolt it into place on the door. Replace the access cover and the door panel.
To install the Mitsubishi Eclipse driver mirror, you will need to remove the interior door panel on the driver's side. Then, remove the cover for the mirror screws. Remove the screws and wiring and remove the old mirror. Replace the wiring and screws as you add the new mirror to the car. Then place the cover and the door panel back on the vehicle.
Remove the front door trim panel. Remove the front window trim. Unplug the power mirror. Remove the access hole cover. Finally, remove the nuts holding the mirror to the door frame.
The mirror cover can be removed by removing the mirror cover retaining bolts. You can access the retaining bolts by removing the inside door panel.
* Remove the door trim panel * On power mirrors unplug the electrical connector * Remove the triangler cover over the mirror mounting * Remove the bolts and detach the mirror from the door
Door Mirror There is a triangular shaped piece of interior door cover (upper front portion of interior door cover) just gentle pull this piece towards you until it pops off, then remove the sponge material from the hole under the cover you just removed, there are now three nuts holding the mirror in place, remove the nuts and any wires attached to the mirror and gently pull the mirror away from the door. ****Warning**** do not drop the mirror nuts while removing them, they will fall inside the door assembly, to recover them requires removing the entire interior door cover.
* Remove the mirror trim cover from the door panel * Remove the three mirror retaining nuts and detach the mirror from the car
on the inside of the door, opposite of the mirror there is a plastic cover, remove the cover and the bolts holding the mirror on will be exposed.
To remove the mirrors from you Nissan Sentra first remove the inside door panel. Pry the plastic mirror cover off of the mirror. Once this is done remove all of the nuts, bolts, or clips holding the mirror to the door.
twist the mirror inward toward the door and then you will see the mounting screws on each side of the mirror.you can see the line around the mirror where it twists.
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.