Want this question answered?
Counter clock wise to loosen.
First you remove the plastic engine cover on top of the valve cover. Then you remove the wires from each of the three coils, then you remove the bolt holding each coil and remove coil. Down in that hole is the spark plug, remove with socket and replace.
I understand that the gasoline filter on a 2003 Pontiac Vibe is in the fuel tank, and seldom needs replacement
No such animal . . . Vibe was released in 2003
It is at the rear driver side of the valve cover. There is a hose leading from it to the Throttle Body.
They are above the cylinder. to find them fallow the distributor cap wires to the spark plugs There are no cap wires on the vibe, take the plastic cover off the top of engine. There are 4 coils in center of valve cover, remove them and the plugs are down in the holes where the coils came off.
The 1.8 liter four cylinder in a 2003 Pontiac Vibe has a timing CHAIN
IT is in the sun
The Pontiac Vibe's first model year was 2003. Because its model year was 2003, that means they were first produced and sold in mid-to-early 2002.
The one location to where the fuses for the air conditioner can be on a 2003 Pontiac Vibe. The fuses for the air conditioner will be in the fuse panel located in the engine compartment.
This is a link to the serpentine belt routing diagram that worked for my '04 Pontiac Vibe. As far as I know, this is the routing for all Pontiac vibe base and GT models. http://forums.genvibe.com/zerofile/1436belt.jpg
Begin by removing the antenna cable from the bottom of your 2003 Pontiac antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.