Want this question answered?
To remove the rear cup holder on a 1998 Toyota Corolla LE, first remove the seat. Then remove the four bolts holding the cup holder housing.
Open the cup holder and remove the two screws on the outside.
Remove original ashtray, remove 4 screws that hold ashtray mounting bracket. This will give access to the 2 screws that hold inner end of cup holder. The cup holder must be pulled all the way out to get to screws. Remove screws, remove 2 screws in front face, cup holder will come right out. Installed updated cup holder in 20 minutes, start to finish!
I cannot find how to remove the cup holder from the dash of my 2001 Pontiac Montana
Pull the cup holder out. Reach back, and at the top rear, center-left, is a tab. Press the tab down and pull out on the cup holder to remove it.
Take it out
Very carefully(;
Remove ashtray if equipped, push cup holder in slightly and hold down on the plastic lever at the rear left side of ashtray slot while pulling out the cup holder. Least that's how to remove it on a 1999 T&C Limited.
The cup holder in a Dodge Ram has four bolts, and two bolts above those bolts. You will need to unscrew all six bolts and then the cup holder drops off.
Pull the cup holder out as far as it will go. Pull up on the seat upholstery right above the cup holder so you can see the very back of the cup holder. There is a tab there. Push down on the tab while pulling out on the cup holder and it will slide right out. Reinstall by lining up in the slide rails and push it back in.
pull it up gentle
It is very simple. In the center of the holder when is pulled out as far as it will go, use a srewdriver blade to push down the tab. The cup holder will now pull out.