This was quite a task the first time I did it, but by the 3rd time I was a pro. I used a Haynes manual to help give me an idea with the pictures they use. You need to start by taking out the center console then removine the center dash trim piece and removing the Radio/CD or tape player. Which will give you access to another screw to remove the center dash piece. Then remove the AC controls. Then remove the glove box. Next you remove the lower knee dash on the drivers side and both kick panels. On top of the dash you will need to pry out the defroster grill.
Once all that is out of the way lock your steering wheel. and you will remove the bolt for the steering linkage from under the dash. Then you have 3 screws on the top of the dash to remove and 3 bolts and a nut on the bottom 2 per side to remove.
That will pretty much get it out except for any wiring that you may need to undo or remove. The harness is really scattered throughout the dash.
I didnt need to completely remove the dash just enough so I could get the A/C and heating box out to replace after it got cracked from and accident.
Hope that helps!
remove the complete dashboard and then replace it
How do your remove the dashboard on a 2000 Ford Ranger?
Remove the screw under the door latch
How do I remove the dashboard.
Yes
Yes, wheels from a 1998 Mustang will work on a 2000 Mustang.
http://www.installdr.com/InstallDocs/Honda/PDF/466005.pdf
Remove the keys and step away from the vehicle!
Remove speaker grill, remove screw holding speaker, screws to the mirror are behind speaker
The 2000 Chevrolet Corvette blower motor control module can be found behind the passenger side dashboard. You will need to remove the dashboard in order to access the module.
you can find the dah and other related Classic Mustang Parts at http://www.aapd.net
remove the negative battery cable for about 10 minutes and then put it back on. done.