0
This was quite a task the first time I did it, but by the 3rd time I was a pro. I used a Haynes manual to help give me an idea with the pictures they use. You need to start by taking out the center console then removine the center dash trim piece and removing the Radio/CD or tape player. Which will give you access to another screw to remove the center dash piece. Then remove the AC controls. Then remove the glove box. Next you remove the lower knee dash on the drivers side and both kick panels. On top of the dash you will need to pry out the defroster grill.
Once all that is out of the way lock your steering wheel. and you will remove the bolt for the steering linkage from under the dash. Then you have 3 screws on the top of the dash to remove and 3 bolts and a nut on the bottom 2 per side to remove.
That will pretty much get it out except for any wiring that you may need to undo or remove. The harness is really scattered throughout the dash.
I didnt need to completely remove the dash just enough so I could get the A/C and heating box out to replace after it got cracked from and accident.
Hope that helps!
What else can I help you with?
How do you remove the dash from a 2002 Ford Ranger?
How do your remove the dashboard on a 2000 Ford Ranger?
How do you remove passenger airbag for 2000 Hyundai Elantra?
remove the complete dashboard and then replace it
How do you remove door panel to get to speakers on a 2000 mustang?
Remove the screw under the door latch
Do you need to remove the fuel tank to replace the fuel pump in a 2000 Ford Mustang?
Yes
Will 1998 Mustang wheels fit the 2000 Mustang?
Yes, wheels from a 1998 Mustang will work on a 2000 Mustang.
How do you change dashboard bulbs in a year 2000 citroen berlingo?
To change the dashboard bulbs in a 2000 Citroën Berlingo, first, ensure the vehicle is off and disconnect the battery for safety. Remove the dashboard panel by unscrewing any screws and gently prying it away from the dashboard. Locate the bulb holders at the back of the dashboard, twist them to remove, and replace the burnt-out bulbs with new ones. Finally, reassemble the dashboard panel and reconnect the battery.
How do you remove the rear view mirror on a 2000 mustang conv?
Remove speaker grill, remove screw holding speaker, screws to the mirror are behind speaker
Where is the brake fuse located at on a 2000 ford mustang?
In a 2000 Ford Mustang, the brake fuse is located in the fuse box, which is typically found under the dashboard on the driver's side. To access it, you'll need to remove the cover of the fuse box. The specific fuse for the brake lights is usually labeled in the diagram on the cover or in the owner's manual, often identified as "Stop" or "Brake." Be sure to check the correct amperage and replace it if necessary.
How do you remove the dashboard on a 2000 Honda Insight?
To remove the dashboard on a 2000 Honda Insight, first disconnect the negative battery terminal to ensure safety. Next, remove any trim pieces and screws securing the dashboard, including those around the instrument cluster and glove compartment. Carefully detach any wiring harnesses connected to the dashboard components before gently prying the dashboard away from the vehicle. Take your time to avoid damaging clips or wiring during the process.
How do you remove the dashboard on a Toyota tazz?
How do I remove the dashboard.
What do dashboard warning lights mean on 2000 Chevrolet Malibu?
Remove the keys and step away from the vehicle!
How to remove the dashboard on a 2000 Honda Civic?
http://www.installdr.com/InstallDocs/Honda/PDF/466005.pdf
