Using a screwdriver, remove the screws that are in the door panel, be sure to remove the clips as well, and gently pull the panel away from the frame. Remove any wire connectors between the frame and the panel, and pull the panel off the rest of the way.
Remove the positive battery cable from your 2000 Chevy Malibu battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the covers to your 2000 Chevy Malibu rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new rear speakers.
2000 Malibu has one on left dash fuse box and one on right end of dash panel.
what is the tire size for a 2000 Chevy Malibu ls
Where is the ecm located in a 2000 Chevy Malibu
Drain the fuel from your 2000 Chevy Malibu fuel tank. Remove the fuel line. Remove the fuel filter retaining plate. Reverse the process to install the new fuel filter.
To replace the hazard switch in a 2000-2005 Chevy Malibu, first disconnect the negative battery cable to ensure safety. Remove the dashboard panel using a screwdriver to access the switch. Unplug the old hazard switch from its connector, then plug in the new switch and secure it in place. Finally, reattach the dashboard panel and reconnect the battery cable.
Remove the entire head lamp assembly
You must remove those pieces that don't seem to flow with the door panel (they pop right off with a screw driver), then you will se screws underneath them... unscrew these screws and the door panel should easily pop right off.
on 3.1--14.3 gallons--2000 Malibu
how to replace actuator on a 2000 malibu
if it is the same number on it!!