http://www.mazda3club.com/showthread.php?t=41318
try looking at the above thread.
There are 3 Phillips screws that need to be removed. One at the top front of the door post, one in the door handle and one at the bottom outer edge. After the screws have been removed lift up on the door panel.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
There are 3 screw at the bottom of the panel then you can use a door panel remover which the local auto stores sell them to change the handle you will have to gut the door to locate the handle.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Remove the screw covers on the door closer handle and remove the two screws (top rear of the door panel. Remove the cover around the door latch handle and remove the screw. Remove the screw along the aft part of the panel about 1/3 up from the bottom. Remove the screw at the bottom of the panel about 1/3 from the back. Pop the window control panel out of the arm and remove the screw. Lift the panel from the slots at the bottom of the panel and the lip at the top. To completely remove, unlatch the cables for the trunk button and the fuel pump light and from the power seat controls.
Door Panels Removal & Installation 1. Remove the sail panel. (Front Door's Only) 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
remove the door panel screws and pull up on the door panel to correctly remove it. then remove the 3 bolts on the upper corner and unplug and replace
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc.The installation is the reverse of the removal.