If you want to just replace the speakers: Remove window crank ( if present ), remove door panel screws. There are several plastic retainers holding the panel to the door. Gently pry the panel from the door at the sides and bottom, then pull the panel up and over the window lip. The covers are "plastic welded" to the panel. Cut the "welds" and pry off the cover.
You will need to remove the rear door speaker covers. The Chevrolet blazer speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the speaker wiring harness.
Remove the speaker covers from your 1997 Mercury. Remove the door speaker retaining screws. Remove the door speaker wiring harness. Reverse the process to install your new door speakers.
If your talking about the door speakers then you will have to remove the door panels to get to the speakers.
How do you remove front door Panel on Hyundai Excel 1999 to Rplace front door SPEAKER'S
remove door paaels u will need a screw drive idiot
you need to remove the door skins first there is a screw on the inside of the speaker cover that holds it on.
Remove door panel, remove 4 screws, remove speaker, put new speaker in, replace screws, replace door panel. Done.
rear door-remove the door panel. back speaker carefully pry off grille cover and replace speaker
To remove the door panel on a 1988 suburban, first remove any light lenses and stereo speaker covers in the door. Then, gently pull at the corners with a screw driver to remove the larger panel.Ê
Use the right sized screw driver, remove the screws and clips from the panel of the car doors. Pull the panel from the door frame, and remove any wiring connections, and the panel should come off.
Open The Door, Remove The Door Panel, Remove Speaker, Wire The New Speaker, Fix The Speaker To The Door, Refix Door Panel, Switch On
Remove speaker grill covers on dash to expose tweeters then remove door panels and you will se the rest of speakers