answersLogoWhite

0

Use the right sized screw driver, remove the screws and clips from the panel of the car doors. Pull the panel from the door frame, and remove any wiring connections, and the panel should come off.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do I replace the front strut on 1999 Saab 9-3?

how do i replace the front strut on 1999 Saab 9-3


Is a 1999 Saab front or rear wheel drive?

Front.


What are the speaker sizes in my 1999 Saab 9 3?

6x9 in the back 3.5 inch in the front


How do you replace a front indicator bulb in a Saab 9 3?

How do you replace a front indicator bulb in a Saab 93


How do you remove a 1988 Saab 9000 alternator?

If it is like a 1989 saab 9000, you remove the front passenger wheel, remove all the plastic from the wheel well, and the alternator should be rite there. You can also get to it by removing the manifold, which allows much easier access to the alternator, but then you need a new manifold gasket.


Where can you get a replacement key to a 1999 Saab?

From SAAB., Your nearest dealer can get a key to match your barrel.


How do you replace an alternator on a Saab 9-3?

how do you replace an alternator on an 1999 Saab 9-3


Will a 94 900 Saab trasmission fit a 99 900s?

Nope. They're completely different. The 1994 Saab 900 has an engine oriented fore-and-aft. The transmission is in the oil pan. There are a lot of other differences, but for now this is enough. The 1999 Saab 900 has a transverse engine like most other front-wheel-drive cars, and the transmission is bolted to the end of the engine. One big advantage of the old layout is the clutch replacement procedure. Instead of having to remove the engine or transmission to get at the clutch, on a classic Saab 900 all you need do is remove a plastic cover.


How much will it cost to repair a 1999 Saab 9-5 head gasket?

Head gasket repair for a 1999 Saab 9-5 3.0l.


How much does it cost to get a new Saab 9-5 transmission?

How do you remove a Saab 9.5 transmission


How do you remove the door panels from your Saab 9 3?

To remove the door panels from a Saab 9-3, first, carefully pry off any trim pieces and remove screws that secure the panel. Next, use a door panel removal tool or flathead screwdriver to detach the panel clips by working around the edges. Once released, lift the panel upward to detach it from the door frame, being cautious of any wiring connected to power windows or locks. Finally, disconnect any electrical connectors before fully removing the panel.


What type of freon does a 1999 Saab use?

R134a