This ones pretty easy......The speaker cage the covers the speakers simply pop out with a small screw driver. Put the flat tip of the screwdriver in the crease anywhere around the speaker cover and simply pry it off. Install by fitting the bottom edge back in the mounting holes and pop back in
If your talking about the door speakers then you will have to remove the door panels to get to the speakers.
The sensor is part of the door latch. You would have to remove the door pne and unplug the latch.
How do you remove door speakers on a 1999 chevy tahoe
To replace the front door speakers on a 2008 Chrysler Sebring, start by removing the door panel. This typically involves unscrewing any visible screws, prying off plastic clips, and carefully lifting the panel away from the door. Once the panel is off, disconnect the speaker wiring harness and remove the old speakers. Install the new speakers by connecting the wiring, securing them in place, and reassembling the door panel in reverse order.
The door speakers are 5.25 inches but you have to purchase an insert in order to replace the door speakers.
the front door and back door speakers are 6" x 8 " speakers
Door Speakers are 6x8...
6 3x4
6x9s
Gently pry off plastic covers in door They are held in by clips underneath are speakers held in by 2 or 3 screws remove speakers. Wires should be snap in plugs remove by unsnapping plug-in.Connect snap-in plug wires to new speakers Place new speakers in door slot for speakers,screw back in ,remount cover back in place
The 1997 Chrysler Concorde door speakers size is three inches by five inches. The rear speakers measure four inches by six inches.
autozone.com has online manuals that give step by step how to