answersLogoWhite

0

keepundoing bolts till the engine falls away and your left with just the head gasket

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you replace a 1989 dodge Dakota thermostat?

Follow top radiator hose toward engine. remove bolts holding housing to engine. remove housing. remove old thermstat & remember how it was in there. (spring toward engine) remove old gasket from emgine & housing. Now reinstall new gasket & thermstat


Where is the head gasket located on a dodge caravan?

Well, if you take off the head,on the engine, you will see the gasket.


How do you remove the oil pan from a 1999 Dodge Durango?

We had to rebuild our engine last year because of engine faliure at 70000 miles and the oil pan was the hardest. The frame is in the way and you have to lift the engine to remove the pan. Does it just need a gasket or new pan?


How do you replace a thermostat in a 2000 dodge neon?

Drain the radiator. Remove the radiator hose. Remove the inlet from the engine. The thermostat is in the inlet. Replace the inlet and the gasket, and reverse the procedure to finish the procedure.


How do you change the thermostat on a Dodge Caravan?

You unbolt the housing that the upper radiator hose hooks to. Remove it and remove the thermostat underneath. Clean off any old gasket, install new thermostat and gasket. Install housing. Fill coolant, warm engine and check for leaks.


Is the 3oo cc engine in a 1993 dodge spirit an interference engine?

According to Gates ( they make timing belts etc. ) the 3.0 L - V6 engine in a 1993 Dodge Spirit is NOT an interference engine ( it does use a TIMING BELT )


What is the junk value for a 1995 dodge spirit?

I just got $250 for my 1995 Dodge Spirit in October 2011. I got the car off a friend when the orginal headgasket went bad at 120,000 miles. I had my mechanic replace the head gasket with a second one. The head gasket I had installed (second head gasket for vehicle) went bad 11,000 miles later. The Dodge Spirit is notorious for having head gasket problems. It wasn't worth putting a third head gasket on it. When a head gasket goes bad on these vehicles you can expect problems with the following: 02 sensor, thermostat, timing belt, and a possible cracked/warped head.


How do you get all 4 bolts off 1994 dodge spirit 4 cylinder water pump?

To remove the water pump on a 1994 Dodge Spirit with a 4-cylinder engine, first ensure that the engine is cool and disconnect the negative battery cable. Drain the coolant, then remove any components obstructing access to the water pump, such as the serpentine belt and associated brackets. Use a socket and ratchet to carefully remove the four bolts holding the water pump in place, being mindful of the order and orientation of any washers or spacers. Once the bolts are removed, gently pry the water pump away from the engine block to avoid damaging the gasket surface.


Is the 1995 dodge spirit 3.0 liter an interference engine?

no it is not


How to replace the rear back gasket of a 1999 dodge VOGER?

This question makes no sense. What gasket, and what is a Dodge Voger. Please ask a new question and include year, make, model, and engine size.This question makes no sense. What gasket, and what is a Dodge Voger. Please ask a new question and include year, make, model, and engine size.


How do you change the oil pan on a 97 dodge caravan wit 3.0 engine?

Jack up the vehicle support on jack stands. remove the starter. Then support the engine with a jack under the trans with a wood block. Remove the front engine mount. Then remove the 2 engine to trans brackets. Then remove the torque converter cover and then remove the oil pan. Replace gasket and install is reverse.


How do you remove the oil pan on a 5.2 dodge ram van?

To remove the oil pan on a 5.2 Dodge Ram van, start by draining the engine oil and removing any components obstructing access, such as the exhaust and crossmember if necessary. Next, unbolt the oil pan from the engine block, carefully prying it loose if it's stuck due to gasket sealant. Ensure all old gasket material is removed from the mating surfaces before reinstalling or replacing the oil pan with a new gasket. Finally, reassemble any removed parts and refill the engine with oil.