How to Install Front Brake Pads
Check Related links below.
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
How do you change the front brake pads on a Ford E-250 van? cannot remove the pads from assembly.
remove the brake caliper and the rotors come right off
7mm
remove rear brake drums
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
Remove the tire and wheel. Remove the brake pad springs. The brake pads will come off. Reverse the process to install the new brake pads.
Lift the car on a jack, remove the tire, remove the brake shoe/caliper and remove the brake pad. Put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car.
# Raise and safely support the vehicle securely on jackstands. # Remove the brake caliper assembly. # Remove the front disc brake caliper anchor plate. # Remove the hub grease cap. # Remove the cotter pin. # Remove the spindle nut. # Remove the front wheel outer bearing retainer washer. # Remove the outer front wheel bearing. # Remove the hub grease cap gasket. # Remove the front disc brake hub and rotor. # Remove the wheel hub grease seal. # Remove the inner front wheel bearing.
In most Fords the rotor will come off when you unbolt the brake caliper.
Lift the car on a jack, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
Lift the car, remove the tire and set it aside, remove the brake shoe/caliper, remove the brake pad and dispose of it. Put in the new brake pad, replace the brake shoe/caliper, put the tire back on the car, and lower the car to the ground.