Are you entirely sure there _is_ a headlight cover?
What do you mean by headlight cover?What are you trying to do?JW
Headlight cover? The headlight can be removed by first removing the bumper cover. THen all the bolt that attach the headlight to the vehicle will be exposed. The "cover" is glued to the headlight housing.
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
Use the button on the dash to raise the headlights, remove the black plastic cover from around the headlight, unbolt the cover from the frame mechanism (IIRC).
You have to remove the entire headlight assembly. Glass cover clips on with plastic clips. Remove and install CAREFULLY as glass breaks easily.
you have to remove the black plastic cover over the headlight and there are 3 tent lik stacks you pull up an out and your headlight is out
the glass cover on the headlight is not servicable, they are glued during assembly. you have to replace the entire headlight globe or headlight assembly.
Bulbs are replaced from rear of headlight. See answer to similar questions for how to do.
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
you dont..they are set in a harness in the back of the headlight assembly which is locked in place..you turn it to unlock it and remove it.
# Remove the front bumper cover # Remove the upper headlight housing mounting bolt and pushpin # Remove the lower headlight housing mounting bolts # Pull out the headlight housing assembly and disconnect the electrical connector