Relieve the fuel pressure. Unplug the injector rail wire harness. Remove the two fuel rail mounting bolts and the small screw and clip that secure the lines to the exhaust camshaft housing. Pull strait out while wiggling the fuel rail. At the top of the injector,remove the clip and unplug the electric. Remove the clip on the bottom of the rail that holds the injector in. Pull the injector strait out. Check that the O-rings are still attached to the bottom of the injector and at the top. If not, CAREFULLY.. remove them from the holes that they were mounted in.
The 1999 Chevrolet Cavalier 2.4L engine has 150HP
The 2.2 liter four cylinder engine in a 2000 Chevrolet Cavalier has a timing CHAIN
9:0.1
Approx 3.5 Litres.
Both the 2.2 and 2.4 liter four cylinder engines in a 1996 Chevrolet Cavalier use a timing CHAIN
Yes that car has a timing belt
The 1997 Chevrolet Cavalier 2.2 liter engine operating temperature is 180 degrees. Aftermarket thermostats can allow the operating temperature to rise to 195 degrees.
The Chevrolet Cavalier 2.2 liter engine will fit into a Chevrolet S 10 pickup. You will need to change the motor mounts on the Cavalier engine in order for the engine to bolt in properly.
The firing order for a 1989 Chevrolet Cavalier is 1, 3, 4, 2. This is for a 2.2 Liter engine.
The 1984 Chevrolet Cavalier 2.0 liter engine fuel pump relay can be found on the firewall in the engine compartment. The fuel pump relay will be on the drivers side of the firewall.
i need to know how to change an automatic transmission mount on a 2000 chevrolet
The 1997 Chevrolet Cavalier 2.2 liter transmission can be filled through the transmission fluid dipstick. Using a funnel will give you the best results.