Want this question answered?
To remove the headlight unit from Vauxhall Vectra SRI 1999, first remove the cover and disconnect the wires by pulling outwards. Push each side of the pin outwards until it releases. Then remove the headlight unit.
Remove backing plate on headlight unit.
There are two bolts holding the unit to the vehicle. Open the hood, look down on the headlight unit, and you will see the two bolt heads. Remove the two bolts, one will be long the other short. Then pull the headlight unit from the car. You will need to disconnect the the headlight wiring if you are benching the unit.
To remove the headlight on the mx-3 you must unbolt the front bumper, loosen all 4? bolts and disconnect the headlight wiring. The whole unit should just pull right off.
Open the hood of the engine compartment. Remove the wiring harness from the headlight. Remove the retaining bolts from the headlight assembly. The headlight unit will come out. Reverse the process to install the new headlight.
To remove the headlight on the mx-3 you must unbolt the front bumper, loosen all 4? bolts and disconnect the headlight wiring. The whole unit should just pull right off.
Open the hood and right behind the headlight unit you will see two clips...just pull them up and the headlight unit comes right out.
Open hood. twist headlight to remove. Unplug old unit. Using gloves to prevent bodily fluids on new unit, remove new unit from pkg and plug in wiring harness. Re-install new unit twisting it to secure and lock in headlight housing.
Raise the hood. Remove the whole headlight unit. Nuts are reachable from inside. Not too difficult pc
You will need two ISO stereo removal keys (each 'key' consists of two pins that fit in holes on the stereo), once in, you can simply pull out of the dash. You can purchase at most automotive stores.
How do I remove the headlight unit on a V6 TDI Passat year 2000?
The head light is a sealed unit. The outer sense is not removable.