0
How do you remove the middle driver's side spark plug on 98 blazer?
Wiki User
∙ 15y ago
Remove the wheel, tape up or remove the innerfender-well flap, use a 5/8 spark plug socket, slide it up onto the plug and use a 3/4 wrench on the end of the socket ( I used a ratcheting wrench, they fit in the space nicely). Remove the plug, lube the rubber inside the plug socket for easy removal. The easiest way to install the plug is to put a piece of tubing on the end, lube the threads of the plug and use the tube to spin the plug in. Then use the socket and wrench to tighten. It took me 2 hours today to change mine and this is how I was able to get it done.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you get the drivers side middle spark plug out of a 1995 Blazer?
easiest way is jack up the truck place a jackstand under the frame remove left front tire and inner splash shield if needed and remove the spark plug through fender well
Where is a knock sensor on a 94 Chevy S10 blazer?
i think it is the sensor located on the drivers side of the motor rite next to the middle spark plug.
Spark plug gap on 2004 Chevy S10 blazer?
Spark plug gap chevy ls blazer
Where is the Temperature sensor in a 1993 blazer?
It is screewed into the head between the first 2 spark plugs on drivers side. If heads have been switch around then it will be between the last 2 spark plugs on the passenger side.
What is the location of cyl 1 on a 1998 Chevy s-10 blazer with a 4.3 v6 motor?
That would be the front spark plug in the drivers side head.
Where is coolant temp sensor on 2000 Chevy s10 blazer with 4.3 vortec engine?
Drivers side of engine, between the #3 and #5 spark plug.
Where is coolant sensor located in blazer 1999?
The coolant temp sensor is located between number 3 & 5 spark plugs on the drivers side cylinder head.
Where is the coolant temperature sensor located on a '95 Chevy Blazer?
On the drivers side between the back 2 spark plugs and just a little lower than the plugs
Where is the distributor on a 1995 Chevy Blazer?
On the 4.3L V6 the distributor is located in the back of the engine, in the middle. Just follow the spark plug wires and they will lead you to it.
How do you remove the middle drivers side spark plug from a 1992 S-10 BLAZER VORTEX 6CYL. ENGINE?
What I had to do is to take the plug socket and put it on the plug then take a open end wrench (3/4" I think) and break it loose. I then took a piece of brake tubing and put it over the end of the plug and backed it out that way. To install reverse the procedure. Otherwise you will have to take the steering column loose.
How do you change spark plugs on a 6 cly2002 blazer?
easiest way is to remove the tires and go in through access panel, real quick and easy
What is the spark plug cap for a 1993 Chevy blazer?
There is no spark plug cap located on the 1993 Chevy Blazer. The spark plug gap for this vehicle varies depending on the type of spark plug that is used. The OEM spark plug gap for this year is 0.040.
