At the top of the shoe the parking brake lever is attached to the shoe with a metal spacer and on the back of this spacer is a C clip you just have to pry the c clip off be careful you don't lose it . you will need it again to put on the new shoes . you also have to pull it out of the emergency cable
You can remove the parking brake lever, from the brake shoe on your Chevrolet Cavalier, by removing the retaining clip. The retaining clip connects the brake lever cable to the brake shoe.
Remove the tire and wheel from your 2002 Chevrolet Cavalier. Remove the brake pad springs and calipers. Reverse the process to install the new brake pads.
The 2001 Chevy Cavalier parking brake has an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
Chevrolet Blazer parking brake can be adjusted with the adjustment screw on the parking brake pad. The parking brake can also be adjusted with the parking brake cable.
The 1996 Chevrolet Camaro parking brake has an adjustment bolt on the parking brake. Turn the adjustment bolt to adjust the brake.
The 2000 Chevrolet Impala parking brake will have an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
How do you. Bleed tear brake
brake and abs light on , on 1994 Chevy Cavalier Z24
How do you adjust parking brake on 2004 chev 2500 series 4x4
Either lubricate or replace the cables Remove rear wheels to lubricate all contact points
The parking brake on these vehicles are basically self-adjusting. Fully apply and release the hand parking brake lever 4-6 times to self-adjust.
# Release the parking brake # Remove the cowl trim panel from the left side of the drivers compartment for access to the parking brake pedal # Pull back on the parking brake cable toward the control assembly (parking brake) and insert a 5/32 inch drill bit into the control actuator to lock the assembly into position # Its actually easier to pull the parking brake cable from under the vehicle but you will need an assistant to help you do this way. # Loosen the rear wheel lug nuts and raise and support the truck # Remove the brake calipers and the brake discs # Detach the parking brake cable from the actuator arm # Clean the parking brake assembly with brake cleaner # Remove the brake shoe retracting spring # Remove the adjusting screw spring and remove the adjusting screw # Remove the hold down springs from the shoes # Remove the parking brake shoes from the actuator