Want this question answered?
Yes
on the bottom left
The 1997 Chrysler Sebring parking brake cable has adjustment nuts on each end of the cable. Adjusting the nuts will lengthen or shorten the parking brake cable.
If it doesn't have a release handle, you step down on the parking brake pedal one more time to release it.
You can remove the parking brake lever, from the brake shoe on your Chevrolet Cavalier, by removing the retaining clip. The retaining clip connects the brake lever cable to the brake shoe.
# Release the parking brake # Remove the cowl trim panel from the left side of the drivers compartment for access to the parking brake pedal # Pull back on the parking brake cable toward the control assembly (parking brake) and insert a 5/32 inch drill bit into the control actuator to lock the assembly into position # Its actually easier to pull the parking brake cable from under the vehicle but you will need an assistant to help you do this way. # Loosen the rear wheel lug nuts and raise and support the truck # Remove the brake calipers and the brake discs # Detach the parking brake cable from the actuator arm # Clean the parking brake assembly with brake cleaner # Remove the brake shoe retracting spring # Remove the adjusting screw spring and remove the adjusting screw # Remove the hold down springs from the shoes # Remove the parking brake shoes from the actuator
Set the parking brake before you put the shift in park when parking.Take shift out of park before releasing the parking brake when driving.
The parking brake pedal is partially set. Pull on its relaese.
what size torx bolt holds the rear parking brake housing on the 2005 chrysler pacifica
back wheels.
Then remove the parking brake........
== ==