ITS TIME CONSUMING , BUT U NEED TO REMOVE BOTTOM PANEL UNDER CAR, REMOVE TOP RADIATOR SUPPORT.. PULL RADIATOR AND COOLING FANS UP BUT BE CAREFUL...MAKE SURE YOU DISCONNECT ALL THE SENSORS AROUND THE FANS. ITS A PRETTY EASY THING TO DO, IT JUST TAKES SOME TIME AND PATIENCE. DONT FORGET TO REMOVE THE HOSES TOP AND BOTTOM.
bj
Remove the belt from your 1990 Acura Legend alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
The transmission filter is not in the pan like most other vehicles. On a 1990 acura legend it's an inline filter kinda looks like a fuel filter but located by the radiator.
I used Valvoline VV155 MaxLife SAE 5w30 Motor Oil in my 1990 acura legend
Some parts are, the 2.7liter is but some of it's electrical components are not
In the gas tank
To remove the hub from a 1990 Acura Legend, first, safely lift the vehicle and remove the wheel. Then, take off the brake caliper and rotor. Next, remove the hub assembly by unbolting it from the steering knuckle and disconnecting any associated components, such as the axle nut, if necessary. Finally, carefully extract the hub from the knuckle, ensuring all parts are properly supported during the process.
welded on
Remove the radiator hoses from your 1990 Buick LeSabre radiator. Remove the radiator stabilizing arm retaining bolt. Remove the radiator retaining bolts. Reverse the process to install your new radiator.
its in front of car in the exhaust manifold, u need a special socket to remove oxegyn sensor. fairly easy
its probably the main relay that needs to be replaced
Vegetable Oil for the rice burner.
Sure it is!.. I have a 1990 Acura Legend, and they are very reliable vehicles, I would just look into the Vehicles history, and the maintenance upkeep on the car..