1. Drain the cooling system.
2. Remove the air cleaner assembly.
3. Remove the plastic rivet retainers and the air deflector from the vehicle.
4. Disconnect the upper radiator hose from the radiator.
5. Disconnect the overflow hose from the radiator.Remove the fan and fan clutch from the water pump pulley.
6. Remove the bolts and lift the fan shroud, and fan and fan clutch from the vehicle.
7. Raise the vehicle.
8. Remove the underbody splash shield, if so equipped.
9. Compress the clamps and slide away from the radiator. Twist the transmission oil cooler hoses and remove from the radiator.
10. Disconnect the lower radiator hose from the radiator.
11. Lower the vehicle.
12. Remove the bolts retaining the support brackets to the radiator support. Lift the radiator support brackets upwards and away from the radiator.
13. Remove the radiator from the vehicle.
On a 1998 Ford E-150 : The thread on cap on your engine coolant reservoir is the pressure cap / radiator cap
Drain the water from the radiator. Remove the radiator hoses. Remove the radiator stabilizing arm. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
i need a full picture view for the removal and instillation for a radiator for a 1989 ford e150 van 5.0 engine
You probably mean a Ford E150 van. On my 1994 E150, the thermostat is behind the air cleaner. Remove the aircleaner assembly. Remove the air hoses that go to the throttle body. You will then see the upper radiator hose. The thermostat is located where the hose enters the engine. You probably mean a Ford E150 van. On my 1994 E150 V8 5.8L, the thermostat is behind the air cleaner. Remove the aircleaner assembly. Remove the air hoses that go to the throttle body. You will then see the upper radiator hose. The thermostat is located where the hose enters the engine.
Where is the engine oil cooler on a 1998 Ford Econoline van E150
The thread on cap on the engine coolant reservoir is the radiator cap
you add coolant to e150 thru the radiator overflow bottle
How do you install a radiator in a 1998 ford contour?"
On a 2001 Ford E-150 : The thread on cap on the engine coolant reservoir is your pressure cap / radiator cap
on the upper radiator support or look undreside of hood
To remove a water pump from a 1998 Ford Windstar 3.0, you will need a tool called a tensioner. Disconnect the radiator and water hoses, then remove the water pump assembly.
Flush your radiator coolant and replace thermostat