Want this question answered?
To remove the cover box to get to the fuel injector on the 2002 Envoy, first remove the intake manifold and the valve cover. You can do this by loosening the four bolts that hold the intake manifold first.Ê
Can you tell me how to remove the box covering the spark plugs in a 2002 gmc envoy slt 4.2
To replace the bulbs on the side mirrors of a 2002 GMC Envoy you will need to open the door. Look on the opposite side of the mirror for an interior panel. Remove the three nuts and take the mirror off. Replace the bulb with a new one and reverse steps to put the mirror back on.
Get underneath the front of the truck there is a big skid plate there is a small door with two screws remove turn the screws and it unlocks the hatch look straight up inside and theres the filter.
There are 2 BCM's on my 2002 GMC Envoy. The first in under the left side of the rear seat. (This is the one I had to change on mine) The second is in the rear liftgate. You'll have to remove the panel to get access to it.
To remove the shroud off of a 2002 Envoy, grasp the shroud on the left side and pull down. Listen for a snap, this is the retaining clip releasing. Pull down on the right side. Once the right retaining clip releases, the shroud is ready to remove.
Where to hook code reader 2002 envoy
where is the oil filter located on an 2002 GMC Envoy
Remove head Remove oil pan Remove wrist pins and push piston up out of the head
GMC Envoy was created in 2002.
Riunning lighs not working 2002 gmc envoy
How to change brake pads on 2002 GMC Envoy front brakes.