It may not seem as if it wants to come off, but there is only a small spring clip holding the wiper blade to the arm. There is no release button. Simply put some upward pressure on the arm and some downward pressure on the blade and it will pop right off.
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
take it off
The engine computer is at the base of the windshield under the hood, under the wiper cowl.
It is under the cowl at the base of the windshield. You will have to remove the wiper arms and the cowl cover to access.
you have to remove the cowl panel under the windshield. it is attached with several screws
Lift cap on the end of the windshield wiper arm where it connects to the wiper motor assembly. Under the cap you will see a nut. Remove the nut with a 15mm socket. Wiggle the wiper arm back and forth until it comes off.
Remove the complete wiper assembly from the bottom of the windshield. This will give you room to remove the alternator.
remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.
try compound
The windshield wiper relay is located in the electrical power distribution center.
My be fuse
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor