Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
On a 1989 Dodge Shadow, the windshield wiper linkage is connected to the windshield wiper motor via a set of arms and a drive mechanism. The motor drives a crank that moves the linkage, translating the motor's rotary motion into the back-and-forth motion needed for the wipers. This connection is crucial for the proper operation of the wipers, allowing them to clear the windshield effectively.
how to change the windshield wiper motor in a 2000 jeep wrangler
How do I change a Wiper motor for a 99 dodge avenger?
No.
take it off
It is under the cowl below the windshield
It is under the cowl at the base of the windshield. You will have to remove the wiper arms and the cowl cover to access.
The wiper linkage is bad. Or the wiper arm stud bushings (where the arms attach to the cowl) are rotted out.
my windshield motor is working great, but the spline that the wiper arm sits on is worn out. do i need to replace the the motor or can i purchase another spline. thank you Ron
Disconnect battery.
The windshield wiper motor is located just below the windshield wiper blades and is covered by a black panel.
remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.