my windshield motor is working great, but the spline that the wiper arm sits on is worn out. do i need to replace the the motor or can i purchase another spline.
thank you Ron
Do u have a wiper motor wiring digram for 1997 doge ram 1500 pickup 2 wheeldrive
replace 1987 dodge pickup/power window motor
Very Carefully
No.
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
The windshield wiper motor is under the front cowl. After removing the cowl the motor should be easily accessed for replacement.
To replace the windshield wiper assembly on a 1976 Dodge D100 pickup, start by disconnecting the negative battery cable for safety. Remove the wiper arms by unscrewing the retaining nuts, then lift the arms off the pivot posts. Next, detach the wiper motor and linkage by removing any screws or bolts securing them to the firewall and under the dashboard. Install the new assembly by reversing the process, ensuring all connections are secure and testing the wipers before reattaching the battery.
On a 1989 Dodge Shadow, the windshield wiper linkage is connected to the windshield wiper motor via a set of arms and a drive mechanism. The motor drives a crank that moves the linkage, translating the motor's rotary motion into the back-and-forth motion needed for the wipers. This connection is crucial for the proper operation of the wipers, allowing them to clear the windshield effectively.
take it off
It is under the cowl below the windshield
In a 1994 Ram pickup, the wiper motor is typically located on the passenger side of the firewall, underneath the dashboard. It is mounted near the base of the windshield and connected to the wiper linkage. Accessing it may require removing the plastic trim or cover in that area.
It is under the cowl at the base of the windshield. You will have to remove the wiper arms and the cowl cover to access.