answersLogoWhite

0

What else can I help you with?

Related Questions

Dodge Durango window motor?

A Dodge Durango window motor can be ordered from any auto parts store. The prices for the window motors will vary depending on the year of the Durango.


Will a 2003 motor fit a 2002 durango?

A 2003 Dodge motor will fit in a 2002 Dodge Durango. The motor mounts may need to be changed, in order for the engine to sit correctly.


How do you replace a 1999 Dodge Dakota wiper motor?

remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.


Do you have to pull the motor to rebuild a 1999 Dodge Durango?

Yes


How do you replace the blower motor in a 2000 dodge durango?

To replace the blower motor in a 2000 Dodge Durango, first disconnect the negative battery cable. Then, remove the glove box to access the blower motor located behind it. Unplug the electrical connector from the motor, unscrew the mounting screws, and take out the old motor. Install the new motor by reversing the removal steps, ensuring all connections are secure before reassembling the glove box and reconnecting the battery.


What is the empty weight of a 2000 Dodge Durango?

The curb weight of a 2000 Dodge Durango depends on the size of the motor. The smallest motor has a curb weight of 4,500 pounds. The largest motor, the V8, has a weight of nearly 7,500 pounds.


Will a 2006 dodge 4.7 liter motor fit in a 2000 dodge durango?

yep but you need to take motor mounts and ecm and wiring


Dodge durango abs motor wont stop running killing your battery?

Change the abs motor.


2001 Dodge Durango blower motor reset switch?

No such part exists


What motor oil weight do i use for 2001 Dodge Durango?

Use 5W30.


Can a 1999 dodge motor replace a 2001 dodge durango motor?

If same size, yesIf same size, yes


How do you remove Dodge Durango windshield wipers?

Lift cap on the end of the windshield wiper arm where it connects to the wiper motor assembly. Under the cap you will see a nut. Remove the nut with a 15mm socket. Wiggle the wiper arm back and forth until it comes off.