0
To replace the blower motor in a 2000 Dodge Durango, first disconnect the negative battery cable. Then, remove the glove box to access the blower motor located behind it. Unplug the electrical connector from the motor, unscrew the mounting screws, and take out the old motor. Install the new motor by reversing the removal steps, ensuring all connections are secure before reassembling the glove box and reconnecting the battery.
What else can I help you with?
Why is your blower only works on the highest setting on your 2001 Dodge Durango Sport?
You need to replace blower motor resistor.
What does the blower motor resister do in a 2002 Dodge Durango?
Short of it is the resistor controls the fan speeds for the blower. Easy to replace and to my knowledge only available through a dealer.
Where is the blower motor resister on a 2001 Dodge Durango?
The resistor is under the passenger dash just left of the blower motor
2001 Dodge Durango blower motor reset switch?
No such part exists
How do you fix the blower motor switch that only works on high on a 2001 dodge durango?
The blower motor speed resistor is burned out.
Where is the Heater blower resister in a 02 dodge durango?
should be the connector in the ac housing closest to the blower motor
Where is the blower motor on a 2000 Dodge Durango?
It is under the dash, behind the glove box.
Does 2001 dodge durango have a blower motor or is it called a blower motor resistor?
Your truck has both. the resistor is between the switch & blower.thje resistor controls the blower speed
Front Blower motor not getting power on your 2001 dodge durango?
That's too bad
1998 dodge stratus you replaced the blower motor resistor and your blower motor still works on high only?
replace the blower motor switch
What would cause blower motor to work on high only on a 2002 Dodge Durango?
either the control head is bad or there is a blower motor resistor that is bad.
Where is the blower motor for 2002 Dodge Durango?
The blower motor for a 2002 Dodge Durango is located under the dashboard on the passenger side of the vehicle. It is typically found near the firewall, behind the glove compartment. To access it, you may need to remove the glove box and some panels for better visibility and reach.
