Under the rear of the tunnel there will be studs with nuts on them. Remove the nuts, lift the seat until the studs clear the tunnel frame. Pull the seat back to release the front retainer, now you can lift the seat, and unplug the wiring, and remove the seat.
remove passenger seat in 2003 cadillac cts
pleasE advise. how do you remove the back seat of the Ls 430 2003? Also what TOOLS ARE REQUIRED?
Remove the bolts holding the seat on each side and then slide the seat back.
how do you remove the back seat in the 2003 poniac grand am
The rear seat cushion on a 2003 Honda Civic is held on by mounting bolts. Push the seat down to reveal the mounting bolts for the seat. Loosen and remove them. Lift the seat up and out of the cabin of the car.
Remove the Allen head bolt that fastens the passenger seat . Then lift this seat upward and pull it back to remove it. Next, find the two bolts that fasten the rider's seat at the rear. Remove them and lift the seat up and pull it back a bit.
Move the seat all the way forward then remove the nuts or bolts from rear. Move the seat all the way back then remove the front nuts or bolts. Tip the seat back and disconnect the electrical plug(s). Remove the seat from vehicle.
It is under the rear seat which you have to remove to access the battery.
Remove seat from car. Remove leather seat covering cushion. Seat heating element is located under leather. If unfamiliar, leave to a professional.
not unless you unbolt it from the vehicle
remove seat, remove neg cable from frame and Pos from battery, remove strap and take out battery.
Two nuts under the tunnel at the rear of the track. Remove them lift the seat until it clears the studs, pull it back to release the front hook. How you can unplug the tail light wiring, and it should be able to remove from sled.