To remove the back seat in a 2003 Hyundai Santa Fe, start by locating the bolts securing the seat bottom. Typically, you'll need a socket wrench to remove these bolts. Once the bolts are removed, pull the seat bottom up and out. For the seat back, look for additional bolts or clips at the base or sides, remove them, and then lift the seat back out of the vehicle.
pleasE advise. how do you remove the back seat of the Ls 430 2003? Also what TOOLS ARE REQUIRED?
Remove the bolts holding the seat on each side and then slide the seat back.
how do you remove the back seat in the 2003 poniac grand am
Remove the Allen head bolt that fastens the passenger seat . Then lift this seat upward and pull it back to remove it. Next, find the two bolts that fasten the rider's seat at the rear. Remove them and lift the seat up and pull it back a bit.
Move the seat all the way forward then remove the nuts or bolts from rear. Move the seat all the way back then remove the front nuts or bolts. Tip the seat back and disconnect the electrical plug(s). Remove the seat from vehicle.
remove passenger seat in 2003 cadillac cts
To remove the rear seat on a 2003 Buick Park Avenue, first, locate the two bolts securing the bottom cushion. These bolts are typically found at the front of the seat, under the cushion. Once the bolts are removed, lift the front of the seat cushion and pull it forward to detach it from the rear clips. For the seat back, look for bolts or clips at the base, remove them, and then tilt the seat back forward to remove it from the vehicle.
To remove the back seat of a 2003 Monte Carlo, start by locating the seat cushion's release mechanisms. Typically, you will need to pull up on the front edge of the seat cushion to release it from the clips holding it in place. Once detached, lift the seat cushion out and set it aside. Next, for the seat back, look for bolts or clips securing it to the frame; remove these using a socket wrench or appropriate tool, then lift the seat back out.
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
how to remove 2004 scion back seat
Under the rear of the tunnel there will be studs with nuts on them. Remove the nuts, lift the seat until the studs clear the tunnel frame. Pull the seat back to release the front retainer, now you can lift the seat, and unplug the wiring, and remove the seat.
remove the screw at the back of the seat.pull the seat off. the battery tray is directly under neath the driver's seat