Using a 15mm wrench, turn the bolt in the center of the idler pulley clockwise to relieve tension and remove the belt.
The door panel in a 1994 Chevrolet Cavalier Z24, can be removed by first removing the lens covers from any lights in the door. Then, remove the light sockets themselves with a screwdriver. Using a flat screwdriver, gently pop the clips on all sides of the door panel and remove it.
in the tank
brake and abs light on , on 1994 Chevy Cavalier Z24
A wiring diagram for the 1994 Chevrolet Cavalier is a diagram that shows the placement of fuses and wiring for lighting and other electronics in the vehicle. This diagram is often found in the owner's manual.
dextron 3
Drain the water from your 1994 Chevrolet Cavalier cooling system. Remove the water supply hoses from the heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
The Alternator is mounted solidly to the engine. It does not adjust. You have to use a wrench to pry back the Serpentine Belt Tensioner ,, remove the belt ,, and then remove all of the bolts that hold the Alternator on.
3.5 inch
mirror CavalierI answered this on another post. 'Power mirror on Cavalier'.
Remove the rear speaker covers in your 1994 Chevy Cavalier. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the rear speakers.
I have a 1994 Chevy Cavalier and the ABS light is flashing
remove all the screws