Loosen the Jam nut on the bottom of the know CW and then turn the knob CCW..
remove access plate on floor around shifter, 4 bolts hold the shifter onto the trans.
how do you remove the doors from a 2004 jeep wrangler
no
Bolted to the floor in front of the shifter.
more specific please. shifter handles should just unscrew.
Not exactly but close.
Remove the access plate on the floor to expose the trans. disconnect the transfer case shifter as 2 of it's bolts are shared with the shifter on the trans. The bracket is held on to the 2 left hand shifter bolts and will have nuts on the top to remove, it is not possible to just move it out of the way without removing the other 2 bracket bolts further down on the trans. Then remove the 4 retaining bolts on the top of the shifter and pull it out.
You may have to remove the shifter and realign forks in the top of transmission--problem usually caused by wear
If you remove the access panel you will see where the shifter is bolted to the top of the trans, remove the 4 bolts holding it on and it will pull straight up and out.
There isn't one on a 1995 Jeep Wranger.
Jeep Wrangler wheel lug patterns years 1995-2006 are 5X4.5Jeep Wrangler wheel lug patterns years 1995-2006 are 5X4.5
The Jeep Wrangler YJ had been kept in production for about nine years from 1986 to 1995. The Jeep Wrangler YJ marked the birth of the Jeep Wrangler series.