Loosen the Jam nut on the bottom of the know CW and then turn the knob CCW..
remove access plate on floor around shifter, 4 bolts hold the shifter onto the trans.
To remove the shifter knob on a 2007 Jeep Wrangler, first, place the vehicle in neutral or park. Locate the small rubber cover at the base of the knob and gently pry it off to expose the retaining screw. Use a screwdriver to loosen and remove the screw, then pull the shifter knob straight up to detach it from the shifter shaft. Be careful not to damage any surrounding components during the process.
how do you remove the doors from a 2004 jeep wrangler
no
Bolted to the floor in front of the shifter.
more specific please. shifter handles should just unscrew.
Not exactly but close.
Remove the access plate on the floor to expose the trans. disconnect the transfer case shifter as 2 of it's bolts are shared with the shifter on the trans. The bracket is held on to the 2 left hand shifter bolts and will have nuts on the top to remove, it is not possible to just move it out of the way without removing the other 2 bracket bolts further down on the trans. Then remove the 4 retaining bolts on the top of the shifter and pull it out.
You may have to remove the shifter and realign forks in the top of transmission--problem usually caused by wear
If you remove the access panel you will see where the shifter is bolted to the top of the trans, remove the 4 bolts holding it on and it will pull straight up and out.
Jeep Wrangler wheel lug patterns years 1995-2006 are 5X4.5Jeep Wrangler wheel lug patterns years 1995-2006 are 5X4.5
There isn't one on a 1995 Jeep Wranger.