Jack up the driverside of car if not using a lift to allow enough room to get under. There are two bolts that will need to be removed which are accessable from the bottom only (15mm). Remove the wires from the starter from the top side of the car. The starter can be removed from the bottom of the car, will take some effort to get past the ac line but will not hurt anything. good luck!
Remove the positive cable from your 1998 Monte Carlo battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
How do I remove the back window in a 1998 Monte Carlo? how do I replace this?How do I remove from other Car's model
The PCV valve for a 1998 Monte Carlo should plug into the valve cover. Twist and pull it to remove and replace it.
How do you replace the ball joints on a 1998 Monte Carlo Z34??
will 2002 monte carlo rims fit 2000 s10
The T60 is the size needed to remove caliper bracket.
you have to remove the throttle body and use 13mm rench to take the thermostat housing bolts off
On my 95 Monte Carlo Z-34, the top speed was 114 and started to cut out at 115.
Yes
It doesn't have a distriburetor.
20,688 were produced.
you just need a puller to take it off, it's not a special puller.