Want this question answered?
I've no personal experience with this particular model, but there's usually a panel on the top side of the handle... pry that out with a pick, and you'll see the inside of the handle is hollow. You'll see a screw inside there.. unscrew that, and the handle comes off.
How to Remove or Install Car Window Crank Handles check related link below
Using a small flat bladed screw driver spread a gap between winder and backing plate look between and you will see the clip with another screw driver ease forward till it pops off! Easy! Fitting is reversal of removal but put clip back on winder and push on till clicks in place oh dont forget backing plate!!
If there is no faster head visible then it likely is attached with a clip on the backside of the crank handle. slip the handle between the handle and door panel to remove the clip.
There should be an Allen head screw in the middle of the connection.
carefully pop off the plastic cover on the handle and in the center there will be a screw
remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.
Look at both ends of the wiper, there should be two little metal clips made into the rubber, you squeeze them together and pull out the blade. If they have been replaced, they might be plastic.
there is a clip on the inside that holds the handle on/ very simple to remove, position the handle with the handle grip up so you can see the other side of the handle. pull outward on the handle some and you should see the clip. take a skinny long screw driver and pop the clip and the handle will come right off.
How to remove 2000 ford ranger rear window. Need to replace would like to replace with a sliding window need instructions how to do it
It snaps in and laps over lower part of window one bolt by door handle
there is a spring loaded clip on the inside of the window winder prise it forward with a screwdriver or something flat then unclip the spring the winder should just fall off if you have anymore questions dont hesiate to ask just email me at ; tjeast12@aol.com hope this is helpfull for you : ) there is a spring loaded clip on the inside of the window winder prise it forward with a screwdriver or something flat then unclip the spring the winder should just fall off if you have anymore questions dont hesiate to ask just email me at ; tjeast12@aol.com hope this is helpfull for you : ) there is a spring loaded clip on the inside of the window winder prise it forward with a screwdriver or something flat then unclip the spring the winder should just fall off if you have anymore questions dont hesiate to ask just email me at ; tjeast12@aol.com hope this is helpfull for you : )