Its attached to the windshield wiper motor you will have to remove the cowl to get access to it.
* Remove the windshield wiper arms * Remove the retaining fasteners securing the cowl cover * Remove the right side cowl cover then the left side
# Remove the windshield wiper arms # Remove the retaining fastners securing the cowl cover # Remove the right side cowl cover then the left side
It is under the cowl at the base of the windshield. You will have to remove the wiper arms and the cowl cover to access.
under the cowl, remove wiper arm assembly, remove cowl, remove windshield washer resvior (sp) and you will find it
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
The wiper motor is located under the black plastic cowl below the windshield.
If I remember correctly it will be located at the bottom of the windshield under the cowl assembly and you will need to remove the wiper arms and the cowl to remove this............
Did you get an answer to your question yet?I need to know as well.
there are small screws/ bolts in the windshield wiper cowl(grill) all along the cowl that need to be taken out, then you need to pull up on the bottom of the wipers to get them off.
To remove the cowl on a 2005 Hummer H2, first, ensure the vehicle is parked on a flat surface and the ignition is off. Remove the windshield wipers by loosening the nuts with a wrench, then lift them off the arms. Next, detach the cowl by removing the screws or clips securing it to the body, and carefully lift the cowl away from the windshield, being cautious not to damage any attached components.