0
What else can I help you with?
What does a tune up cost for a 2002 Saturn l300?
If it is a 6 cylinder it will cost upwards of $300.00 because you have to remove the intake to get to the spark plugs..
How do you take off the intake manifold on a 2002 freelander?
Remove four main upper intake bolts (10mm). PCV hose and fuel line should be take apart and moved aside. The intake is secured by three heavy o-rings and is press fitted. To remove upper intake, rock back and forth carefully and pull towards the firewall at approximately 45 degrees.
How do you change the wiper motor on a 2002 Saturn SC1?
How to remove the wiper motor on a 2002 Saturn sc1
What are torque specs intake bolts on 3.4l 2002 Chevy impala?
lower intake is 132 lb's upper intake is 89 lb
How do i remove the upper console in a 2002 sport trac?
To remove the upper console in a 2002 sport track, kindly use your manual so that you get everything in order.
Where is the ECU on a 2002 Saturn L300?
It bolts to the top of the intake manifold. It should have to large plugs on top of it
How do you remove the air intake on a 2002 kia sportage?
Take out the screws.
Where is the PCV valve located on a 2002 Mercury Cougar V6?
In the valley under the upper intake.
Where in the thermostat located on an 2002 Isuzu axiom?
Under the intake manifold, under the upper outlet.
How do you remove the cover box to get to the fuel injector in Envoy 2002?
To remove the cover box to get to the fuel injector on the 2002 Envoy, first remove the intake manifold and the valve cover. You can do this by loosening the four bolts that hold the intake manifold first.Ê
Where is knock sensor on 2002 Yukon?
It has 2 of them and there both underneith the intake manifold. You can not see are get to them until you remove the intake.
How do you remove upper right motor mount on 2002 cavalier 2.2L ecotec?
To remove the upper right motor mount on a 2002 Cavalier with a 2.2L Ecotec engine, first ensure the vehicle is securely lifted and supported. Remove the bolt securing the mount to the engine and the bolts that attach it to the frame. You may need to remove any components obstructing access, such as the air intake or battery. Once all bolts are removed, carefully lift the mount out of its position.
