answersLogoWhite

0

To remove the upper intake manifold on a 2002 Saturn Vue 3.0L, first disconnect the negative battery terminal and remove any components obstructing access, such as the air intake duct and throttle body. Next, detach the vacuum lines and electrical connectors from the manifold, then unbolt it from the engine using the appropriate socket wrench. Carefully lift the manifold off the engine, ensuring no debris falls into the intake ports. Finally, clean the mating surfaces before installing a new gasket if you plan to reinstall the manifold.

User Avatar

AnswerBot

6mo ago

What else can I help you with?

Related Questions

What does a tune up cost for a 2002 Saturn l300?

If it is a 6 cylinder it will cost upwards of $300.00 because you have to remove the intake to get to the spark plugs..


How do you remove the upper intake in a 2002 Kia Sedona?

To remove the upper intake on a 2002 Kia Sedona, first ensure the engine is cool and disconnect the negative battery cable. Then, remove any engine covers and disconnect the throttle body, vacuum lines, and electrical connectors attached to the intake. Next, unbolt the intake manifold using the appropriate socket, carefully lifting it off the engine while checking for any remaining connections or hoses. Finally, clean the mating surfaces before reinstalling or replacing the intake.


How do you change the wiper motor on a 2002 Saturn SC1?

How to remove the wiper motor on a 2002 Saturn sc1


How do you take off the intake manifold on a 2002 freelander?

Remove four main upper intake bolts (10mm). PCV hose and fuel line should be take apart and moved aside. The intake is secured by three heavy o-rings and is press fitted. To remove upper intake, rock back and forth carefully and pull towards the firewall at approximately 45 degrees.


How do you replace upper and lower intake gaskets on a 2002 Pontiac grand prix gtp?

To replace the upper and lower intake gaskets on a 2002 Pontiac Grand Prix GTP, first, disconnect the battery and remove any components obstructing access, such as the air intake and throttle body. Then, remove the intake manifold bolts and lift off the upper intake manifold, followed by the lower intake manifold. Carefully clean the gasket surfaces, install new gaskets, and reassemble the manifolds, ensuring all bolts are torqued to the manufacturer's specifications. Finally, reconnect all components and the battery before starting the engine to check for leaks.


Where is the idle air control valve on a 2002 Saturn?

The idle air control (IAC) valve on a 2002 Saturn is typically located on the throttle body, which is found on the intake manifold. To access it, you may need to remove the air intake duct. The valve is usually mounted with screws and has an electrical connector attached. Always consult your vehicle's service manual for specific details and diagrams.


What are torque specs intake bolts on 3.4l 2002 Chevy impala?

lower intake is 132 lb's upper intake is 89 lb


How do i remove the upper console in a 2002 sport trac?

To remove the upper console in a 2002 sport track, kindly use your manual so that you get everything in order.


Where is map sensor on 2002 Saturn l100?

The map sensor on a 2002 Saturn L100 is typically located on the intake manifold, near the throttle body. It is a small, rectangular component with an electrical connector attached to it. To access it, you may need to remove any covers or components obstructing your view of the intake manifold. Always consult the vehicle's service manual for specific details and diagrams for accurate identification.


Where is the ECU on a 2002 Saturn L300?

It bolts to the top of the intake manifold. It should have to large plugs on top of it


Where is the PCV valve located on a 2002 Mercury Cougar V6?

In the valley under the upper intake.


Where in the thermostat located on an 2002 Isuzu axiom?

Under the intake manifold, under the upper outlet.