A simple inexpensive tool is available at your local auto parts store. There is a C clip behind the handle that needs to be removed to release the handle.
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
You have to remove the inside panel, where the window crank is, or would be.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
There is a "C" clip behind the handle that must be removed. Your local auto parts store can sell you an inexpensive tool to help you remove the clip without damage done.
If you push back the door panel, you should see a retaining clip behind the center of the crank. Pull it out with a small needle nose pliers.
There is a c-clipthat holds the crank in place,you just need to push it off and the crank comes off.
there is a C shaped clip behind the handle. I have the tool to remove it you can get them at auto zone. you can also use a small pick to pull clip out but watch out it will fling out
behind the window crank
You will need to remove the inside door panel of your 1977 Chevrolet blazer. Remove the window crank linkage. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
Most chevys have a horseshoe shaped clip on the window crank. There is a special tool to remove it , but I just push them off with a small screw driver, or hook the back with a dental tool
IF there isn't a cover that unsnaps over IT-then U need a special slotted tool that goes behind the crank & pushes the C clip off-IT slides in right behind the window crank-ITS just a thin piece of metal that's slotted 2 push the clip off .
Window cranks are easy to remove. Go to the local auto parts store, and ask for a window crank removal too. Slip it in behind the crank until it comes free.