First isolate the area that needs repair and drain it. If it is only a hole in a PVC water pipe Get a piece of pipe the same size and cut it in half along the length. Clean both the pool pipe with the hole in it and the new piece of pipe with primer then put PVC solvent cement on both the patch and the pipe and hold it firmly in place until the solvent cement has set, To save you having to hold it in place you can get one or two hose clamps to do the job for you. If a large section of pipe needs replacement, cut out the damaged pipe and replace with similar pipe and connectors.
Firstly you find out how the DE got into the pool - must be a broken filter pad. Fix that, then vacuum the pool. No point vacuuming before you fix the filter problem, or the DE will finsih up back in the pool.
i sewed the broken rope with 100lb test line to nylon tab. Works.
one of your lines are broken. really simple to fix.
One reason is that you have a Sand Filter and one of the tines is broken
If you have broken armour you fix it in your house.
instructions on how fix a broken finger
You have to get your hands dirty and need to get under the vehicle and locate the fuel lines from the tank to the engine.
You should have NO D.E. going back into the pool when you vacuum or anytime else. If you do have it going back in, you need to open the filter and check to see what part is broken, loose or missing.
The cost to fix a broken starter depends on the type of starter and where a person goes to fix it. It can range from $50 to $200 to fix a broken starter.
Look for a broken vacuum line coming out near the ac lines on the passenger side under the hood.Look for a broken vacuum line coming out near the ac lines on the passenger side under the hood.
Single broken white lines?
the purpose of three broken lines is a triangle!