how to repair cracks on yukon dash
Stick you tongue to it!
Switch off the power at the distribution board (NOT the local socket) - then use an insulated 'prop' to pull or push the casualty away from the source of electrocution.
It could be due to a fault on the power supply board (Bad Caps). Assuming the 'main board' refers to the main processor board.It could be due to the new board not being an exact replacement.There could be a short circuit on the main board, taking one of the supply lines down.The plug in cables may not be seated properly or in the wrong socket.
If you are getting power in the socket--replace heating element If you are getting power to the socket, but not through it--replace socket and element
Switched Socket Outlet
Switch off the power at the distribution board (NOT the local socket) - then use an insulated 'prop' to pull or push the casualty away from the source of electrocution.
I need a wiring diagram for the power seats in a 2001 GMC Yukon
2005 yukon BACK DOOR CATCH LOCK
Go bu a Haynes Auto repair Manual. Consult your local library's on line resources for auto repair. Check the fuse. if ok check the plug on the back of the switch on the panel, that means pulling the front of the dask maybe. Go bu a Haynes Auto repair Manual. Consult your local library's on line resources for auto repair.
Here's how to test and repair power windowshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
No, unless there is an indicator light in the socket.
With a volt meter check to see if you have power to that socket. Check at the wire not the socket. If you find you have power, either the socket is corroded or broken. Also check the ground connection at that socket.