0
Depending on what the repair consists of you can actually do most pebble tec surface repairs yourself, you just need a chisel and a hammer and a little skill to read directions and the ability to use a small trowel. you can research pebble tec patch kits on the internet and find a kit that matches your color.
Wiki User
∙ 13y ago
Wiki User
∙ 13y agoIt's really pretty easy to do with a little skill you can chip away the old surface, make some scratch marks on the pool beam or surface, I imagine when you say "exposed edge" you mean the "rolled bond beam". The best thing to do is pick up a pebble repair kit of your color and test out your skills at the repair.
Add your answer:
Earn +20 pts
Can you polish pebble tech?
yes
Where can you buy pebble tech for a do it yourself project?
SCP usually has it in stock you can reach them at www.scpool.com If you need installation contact Scuba Pool Repair- Repairing your pool Underwater: 800.330.7068 or visit www.scubapoolrepair.com
Can insects be a problem with a crack in pebble tech?
I doubt it and if it worries you, fill the crack with a cement grout mixture,
Does pebble tech get damage with out water?
Any pool Interior finish will dry out and crumble if allowed to do so.
What is the best commercial pool surface product to replace rubber tiles in a play spray area?
Pebble tech
What is the difference between pebble-tech and quartz and wetedge?
There is a web link describing quarts finish below. There is also a web link on pebble tech below. pebble tech and quarts are pool surface finishes (see the links mentioned above) Wet edge is a method of constructing a pool where by one or more edges of the pools side are built just below the waters natural surface height. This brings about a situation where water is constantly falling over the edge of the pool into a balance tank and then via filtration back into the pool.
What qualifications do you need for mobile phone repair?
ITC tech engernering tech cad cam
What is a small rock called?
The smallest type of rock is a pebble. A pebble can be made out of most rocks and is the size of a marble.
Your pool has several small cracks The material is pebble tech How can you fix it?
Drop the water below the cracks. Remove loose cement and texture down 1/4 inch. Mix the Pool Pebble Repair compound. Apply the compound to the crack and wipe off excess. Allow to cure for 12 hours.
How do you clean sand colored pebble tech on the coping aarea?
A 10-20% solution of muriatic acid and bristle brush will clean the pebble tech. Be careful, the acid will burn if it comes in contact with skin or eyes. By 10% I mean 1 part acid to 9 parts cold water. Always add acid to water not water to acid due to unwanted thermal reaction.
What is the best thing to clean the water line calcium in pebble tech pool?
brush it with a strong solution of acid, Becarefull for your eyes ETC and then hose it down.
Will it hurt the pebble tech finish if the pool is drained for 3 or more months?
It shouldn't after all the top of the pebble tech pool is out of the water forever and it doesn't seem to hurt it. However be careful that you don't get a build up of ground water around the outside of the pool, This can cause an empty pool to start floating and that will definitely hurt it. If you have a hydro static valve at the bottom that works it should be ok.
