lower the tail gate on the truck. there will be 2 torqx head screws removed the screws it will loosen the inside of the tail light assy... pull on the tail light assy strait back. the light assy should come out turn the bulb casing on the back of the light assy and pull the bulb out.
Have a look at this link: http://www.wikihow.com/Replace-a-Tail-Light-on-a-Dodge-Grand-Caravan
THERE IS NO PARKING LIGHT LENSE FOR THE REAR. IT'S ONLY THE TAIL LAMP ASSEMBLY!
the tail light is screwed in from the inside of the bed of the truck
don't bother....it seems impossible
The fuses on the 2000 Dodge Durango should be labeled for each part such as the tail lights. The tail light fuse is a 30 A.
tail lights circuit
try going to www.lxforums.com...all sorts of info on the magnum.
you don't replace the tail light you just replace the bulb in it
open the trunk and there should be a couple screws where the lights are.
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
There are three plastic nuts accessible from inside the trunk.
The taillights are an assembly. The lens covers can not be replaced separately