Want this question answered?
FRONT OR REAR ?
The master cylinder contains the reservoir for the brake fluid. This is where you would add it on an 1990 Cutlass Supreme.
It's less than 2 hours work - depends on local labour cost.
DOT-3
under the steering column above the brake pedal
Replacing the brake pads on your 1982 Oldsmobile Cutlass is quite easy. Remove the brake pad Springs and caliper. The brake pads will come off. Reverse the process to install the new brake pads
It's on top of the brake pedal under the dash.
The 1995 Oldsmobile Cutlass brake rotors will cost approximately $40 per wheel. The rotors can be as cheap as $25 at some discount auto-parts stores.
be more specific, bleed, what kind, or crossreferences of other models..
One of two things. Either the brake light switch behind the brake pedal. Or try wiggling or rotating your turn signal stalk in a circle motion. If the brake lights work when the turn signal stalk is wiggled then you need to replace the turn signal stalk.
Unbolt the master cylinder and remove the large vacuum hose. Remove the 4 nuts that attach it to the firewall and it slides right off. It's a pretty simple job.
Just tell the parts store what type of car you have and they will be able to get you the right pads.